We provide a library for the Ir Eclipse Click as well as a demo application (example), developed using MikroElektronika compilers. IR ECLIPSE Click electrical specifications Description ![]() Logic Level Voltage Selection 3V3/5V: Left position 3V3, Right position 5V This table shows how the pinout on IR ECLIPSE Click corresponds to the pinout on the mikroBUS™ socket (the latter shown in the two middle columns). Photo interrupter ability for any application, up to 3mm detection space, detection through digital signal, object detection LED indicator, board compatible with both 3.3V and 5V capable MCUs, and more SpecificationsĬan be used for printers, copiers, vending machines and other projects that require the photo interrupter ability, detection of a moving part, or even a speed of rotationĮE-SX198 - transmissive photomicrosensor with a phototransistor output from Omron However, the Click board™ comes equipped with a library containing easy-to-use functions and an example code that can be used, as a reference, for further development. This way, both 3.3V and 5V capable MCUs can use the communication lines properly. This Click board™ can operate with both 3.3V and 5V logic voltage levels selected via the LOGIC LEVEL jumper. Also, the INT LED serves as a visual indicator of the activated sensor. The INT pin provides information to the MCU about the presence of an object in the gap and about the sensor's activity. The IR Eclipse Click communicates with the host MCU using only the INT line of the mikroBUS™ socket. Some smaller objects do not fully intercept the optical beam emitted by LED therefore, some parts of the beam come to the detector and allow current flow from the phototransistor (considered noise). ![]() The object intercepts the optical beam of the emitter, thus reducing the amount of the optical energy reaching the detector. The sensor activates when an object in the gap, such as a piece of paper, eclipses the transmitter beam. It consists of one infrared transmitter and receiver facing each other and spaced apart by a 3mm slit. IR Eclipse Click is based on the EE-SX198, a transmissive photomicrosensor with a phototransistor output from Omron.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |